Google ds

 




Prepare Flash X 25 QMobile 


Firmware Stock Rom   X 25 QMobile 


 Latest  Version Of  Sp      flash tool 


 USB Driver MTK Driver     X 25 QMobile 



How To Flash  SP Tool


Flashing X 25 QMobile 

1. first time, please Install driver for X 25 QMobile that already downloaded before. 

2.Extract the other downloaded file  <<<(firmware and flash tool>>>   save in anywhere on your hard drive.

3.Then remove your back case, battery, sim card and SD Card  if installed

4.Next, Connect your   X 25 QMobile   will detect the new hardware

5.Then, release USB data cable from the PC. 

6. Open SP flash tool software  and click scatter load. find X25 Q Mobile

7. X25 Q Mobile  scatter storage location earlier.   

8. In the Scatter Loading field Go to Tha folder where you extracted the Flash Tool and select MT6752_Android scatter  

Flash _ Install Firmware X 25 QMobile 

9..On download tab, ensure you have selected download only option from drop down menu, see below picture   
           
Flash / Install Firmware X 25 QMobile 

10..Then, click download button on top right and connect your X 25 QMobile with USB cable in phone switch off position.




11.Process will run automatic, and you can see the red stripe showing download percentage at bellow
When your process complete, you can see a green circle with tick mark


Flash / Install Firmware X 25 QMobile 

12.Now disconnect your X 25 QMobile 
Intall you battery 

13.Then, start your X 25 QMobile . (remember, on the first booting it will take a long time to start> 

Reactions:

Post a Comment

 
Top